At present, when installing underfloor heating, it is necessary to install a thermostat setting, and this is also the case when installing wall-hung boilers. The appearance of the thermostat set has undoubtedly facilitated people's lives. The thermostat set has a friendly user interface, and the relevant information of the indoor heating system can be presented on the interface, which is very convenient. The wireless thermostat for underfloor heating mentioned here is an upgraded product with higher technical content. With the further popularization of underfloor heating and wall-hung boilers, the market for a wireless thermostat for underfloor heating has become broader.
Compared with the traditional thermostat set, wireless thermostats for underfloor heating are special in terms of wireless. No wiring is required, and the technology of radiofrequency wireless transmission is used to control the on and off state of cold water, hot water, steam and other fluids. The wireless thermostat senses the difference between the indoor temperature and the user's set the temperature to calculate the opening or closing signal of the valve, and then transmits the signal to control the heating on or off, thereby keeping the room temperature at a constant level. It is convenient for users to use.
The wireless thermostat for underfloor heating uses radiofrequency technology to sense the heating condition without wires. The switching state of the actuator valve is controlled by the thermostat setting, and the indoor temperature is obtained through induction. If the set temperature of the thermostat set is greater than the indoor temperature, the control actuator will be opened to issue a heating command; if the set temperature is lower than the indoor temperature, the control actuator will be closed.
If the user wants to know the on-off state of the electric heating actuators in each room, they can distinguish them by the indicator lights. After power on, the wireless thermostat will automatically open the valve. In the open state, users can see that the indicator light is always on. If the brake receives a valve closing command, the indicator light will always be off. It should also be noted that when the actuator is powered off, the electric actuator is automatically turned on to ensure normal heating.
Users can choose to install a wireless thermostat for underfloor heating, which can be controlled at will. Many home appliances are now with wireless multi-zone underfloor heating control systems, and many remote controls use radio frequency technology. Choosing a wireless thermostat for underfloor heating also conforms to the trend of the times. In the future, there will be more applications.