Now underfloor heating is a common way of heating in our lives. Many families install underfloor heating systems in the process of decorating their houses. The temperature of floor heating systems is from bottom to top, which meets the human body's temperature needs, and is a relatively comfortable form of home heating.
Now with the improvement of living standards, most families can afford to install underfloor heating systems, and more and more families are beginning to pay attention to underfloor heating systems. Let's take a look at the knowledge of best floor heating systems.
1. Comfortable and beautiful:
The best effect on human health and heating efficiency is to gradually cool down from bottom to top. The best radiant floor heating is the closest to ideal heating method. Heating is provided by geothermal method, and the indoor surface temperature is uniform. The temperature gradually decreases from bottom to top, giving people a good feeling of warming the feet and cooling the head. When people stay on the warm floor, the feet are warm and the upper part of the body is not affected by the cold radiation, so they feel very comfortable. The indoor temperature is uniform, the temperature difference is small, and the gradient is reasonable. It heats the foot area where the human body is most likely to feel cold, which meets the physiological needs of the human body; it does not occupy indoor space and can fully display the decoration personality.
2. High efficiency and energy saving:
When geothermal heating is used in the hall, the temperature distribution along the height direction is relatively uniform, the temperature gradient is small, and the ineffective heat loss is reduced. Practice has proved that the thermal efficiency of geothermal heating rooms is relatively high, and the heat is concentrated in the height that benefits the human body. Under the same warm and comfortable conditions, the temperature setting of floor heating can be 2~3°C lower than other heating methods. Relevant technical data shows that if the indoor temperature is reduced by 1°C, it can save energy by nearly 10%.
The underfloor heating system uses an underfloor heating temperature control system for temperature adjustment.
For flat-floor units, a temperature control device is generally installed in a typical location (living room, master bedroom). The temperature control device is connected to the wall-hung boiler. The temperature controller directly adjusts the boiler feed water temperature according to the room temperature and temperature settings. The temperature of each room rises and falls at the same time during operation. Different circuits in each room are manually adjusted based on experience to set the opening of different circuit valves, change the flow of different circuits, and adjust the relative height of the room temperature in different rooms.
Multi-storey apartment types mostly adopt zone control. Generally, separate water separators are installed on each floor, and a thermostat is set to feedback the temperature in the area to the water separator inlet valve to adjust the water flow rate, and then adjust the floor temperature, the temperature of each room in the same floor rises and falls at the same time.
The above is a brief introduction to the floor heating system. POER is here to tell you that the floor heating system will be the mainstream heating method in the future, and you should learn more about the floor heating system.