Common Questions and Solutions for Floor Heating Temperature Control

Ground heating is an ancient and new technology. It is already an advanced and mature heating method. The floor heating system is buried under the floor, only the intelligent WiFi thermostat is above the ground, then what is the common problem of the electronically warm controller? How should we deal with it?

1. The indicator fault of the smart WiFi thermostat

(1) The power indicator is not bright. This situation first checks if the heating head gate is closed, followed by checking if the switch of the temperature controller is open. If the total gate is closed and the thermostat switch is turned on, the power indicator is still unlighted, indicating that the smart WiFi thermostat is faulty or contacts.

(2) The power indicator is on, but the heating lamp has not been lit. This situation can first adjust the thermostat knob to the highest temperature, waiting for about 40 seconds to see if the thermostat indicator lights. If the indicator has no obvious heat source around the smart WiFi thermostat, the temperature controller fault or other reasons are described.

(3) The heating indicator of the thermostat is always on. In this case, you can adjust the temperature control knob of the thermostat to the lowest, and wait for about 40 seconds to see if the heating indicator light turns on. If it keeps on and the temperature around the thermostat is significantly higher than the set temperature, it indicates that the thermostat is malfunctioning or other reasons.

2. The control circuit fault of the smart WiFi thermostat 

Accuracy is one of the important indicators for measuring floor heating thermostats, but how to measure its accuracy? You can use a thermometer to measure the temperature around the thermostat, and then adjust the temperature control knob to a temperature slightly higher than this temperature. At this time, the heating indicator light should turn on, and if it is slightly lower than this temperature, the heating indicator light should go out. It should be noted that the control of the smart WiFi thermostat generally has a certain deviation, but if the deviation does not exceed 1 ℃, it will not affect the normal use.