A 3 zone heating control is a zoned system with one unit that provides heating and cooling control to different areas in your home. In a 3 zone heating control, you have 3 completely divided units that each control one single zone with separate, unconnected thermostats.
A 3 zone heating control is a zoned system with one unit that provides heating and cooling control to different areas in your home.
The 3 zones central heating programmer for 3 zone heating control is a control panel that allows you to set the time you want your heating and hot water to come on and go off. Depending on the type of programmer, you may be able to choose whether you want to heat only, hot water only or both heating and hot water.
Electric floor heating is available to apply POER PTC10/PTR16 thermostat set, the actuator supports up to 16A of electric floor heating equipment. Each room can be individually controlled and the gateway PTG10 connects to up to 10 thermostats.
With hot water control function, the heating mode of PTC10/PTR10-HW is the same as usual. When the room needs to be heated, the PTR10-HW actuator will absorb the wall-hung boiler to start heating, and the two radiator thermostatic valves will also open so that the hot water will pass through the valves to the heater in each room. Our software has 3 periods to manually open the hot water heating switch, and when there is a need for heating, the radiator thermostatic valve will be opened. At this time, the hot water will flow to the hot water storage tube with a temperature control system. Once the temperature reached the set one, it will break off the hot water heating.